Mold drawing design standards1. Add the shrinkage dimensions to the plastic part...
Solutions to surface flow patterns, deformation and ejection deformation on both sides of the mold
Solutions to surface flow patterns, deformation and ejection deformation on both...
Solutions for the rubber powder and inner side scratches on the sprue of the mold
Solutions for the rubber powder and inner side scratches on the sprue of the mol...
Solutions to the deformation at the sprue position of the mold, the flash at the round top pin position (excessive glue), and the baking mark at the glue inlet position
Solutions to the deformation at the sprue position of the mold, the flash at the...
Solutions for burrs, sticking to the mold, wire clamping and deformation of the mold
Solutions for burrs, sticking to the mold, wire clamping and deformation of the ...
How can the surface dirt, water line inclusion and warping deformation of the mold be solved
How can the surface dirt, water line inclusion and warping deformation of the mo...
Solutions to the problems of hard rubber indentation, row position demolding and inconsistent product dimensions in molds
Solutions to the problems of hard rubber indentation, row position demolding and...
Solutions for air marks at the water outlet position of the mold and drag damage at the water outlet position of the battery frame
Solutions for air marks at the water outlet position of the mold and drag damage...
How can the top white and surface elevation of the mold be solved
How can the top white and surface elevation of the mold be solvedThe top white o...
Solutions to the uneven surface of the mold, the whitening of the bone position due to trapped air, the air lines at the glue entry points, and the lack of glue
Solutions to the uneven surface of the mold, the whitening of the bone position ...
How can the frequent breakage of the water inlet needle of the mold, the raised bone position and the excessive glue on the side (flash) be solved
How can the frequent breakage of the water inlet needle of the mold, the raised ...
Solutions to the problems of column bending deformation, delamination, surface peeling and frequent pressing of small spouts in the mold
Solutions to the problems of column bending deformation, delamination, surface p...
How to solve the problems of whitening, charring and deformation of the bone position at the water outlet of the mold
How to solve the problems of whitening, charring and deformation of the bone pos...
Solutions to the problems of pin tip, pin shrinkage and trapped air fracture in molds
Solutions to the problems of pin tip, pin shrinkage and trapped air fracture in ...
Solutions for mold clamping lines, surface clamping marks and clamping position sticking to the mold
Solutions for mold clamping lines, surface clamping marks and clamping position ...
Solutions for air streaks, charring, wire jamming, height elevation or trapped air in molds
Solutions for air streaks, charring, wire jamming, height elevation or trapped a...
Solutions to wire clamping, surface indentation and punch marks in molds
Solutions to wire clamping, surface indentation and punch marks in moldsThe clam...
The solutions for the air marks at the arrow position in the mold direction, the black shadow lines (fusion lines) on the surface, and the trapped air and white spots at the lamp hole position
The solutions for the air marks at the arrow position in the mold direction, the...
Solutions to the problems of wire clamping, clamping position pull-over deformation and air marks in molds
Solutions to the problems of wire clamping, clamping position pull-over deformat...
The trapped air adjustment of the mold is difficult, and the deformation and the bottom row position pulling mold treatment method of the face shell
The trapped air adjustment of the mold is difficult, and the deformation and the...