Surface roughness of mold-formed partsI. Representation Methods and Meanings of ...
Design of the external dimensions of mold-formed parts
Design of the external dimensions of mold-formed parts According to the ext...
The cavity arrangement and parting surface of the mold
The cavity arrangement and parting surface of the mold Forming parts refer ...
The limit switch of the mold
The limit switch of the mold In some cases, the actions of different mechan...
The positioning ring and screws of the mold
The positioning ring and screws of the moldOne: Positioning circleThere are two ...
Basic processing items and requirements for mold base
Basic processing items and requirements for mold base(1) Fixed mold A plate and ...
Check the thickness of the wall
Check the thickness of the wallThe principles for designing the wall thickness o...
Tolerance and fit of injection molds
Tolerance and fit of injection moldsI. Common tolerances and fits of parts in in...
Dimension marking of the mold design drawing
Dimension marking of the mold design drawingI. General Requirements for Dimensio...
The general process of mold design and drawing
The general process of mold design and drawingOne: Organize and inspect customer...
Types and basic requirements of mold design drawings
Types and basic requirements of mold design drawingsTo shorten the production cy...
Classification of injection molds
Classification of injection moldsDifferent types of molds have different require...
Solutions to the problem of easy breakage at the junction of the mold's appearance color difference and material flow
Solutions to the problem of easy breakage at the junction of the mold's appearan...
The decisive methods for the height of the water outlet position beside the mold housing, the damage and deformation of the front mold cavity
The decisive methods for the height of the water outlet position beside the mold...
Solutions to the problems of air streaks, exposed glass fibers and charring in molds
Solutions to the problems of air streaks, exposed glass fibers and charring in m...
The grooves of the mold's injection air inlet, the surface light and shadow, the scratches on the grooves and the size of the screw holes have increased
The grooves of the mold's injection air inlet, the surface light and shadow, the...
The screw columns of the mold are prone to damage and weld marks/shrinkage
The screw columns of the mold are prone to damage and weld marks/shrinkageThe sc...
Methods for the easy breakage of the internal position of the mold and the easy damage of the screw column during the mold opening process
Methods for the easy breakage of the internal position of the mold and the easy ...
The glue inlet position of the mold is dragged and charred
The glue inlet position of the mold is dragged and charredThe glue inlet of the ...
The U-shaped position of the mold is filled with water lines and trapped air, which turns white
The U-shaped position of the mold is filled with water lines and trapped air, wh...