Dimension marking of the mold design drawingI. General Requirements for Dimensio...
Mold drawing design standards
Mold drawing design standards1. Add the shrinkage dimensions to the plastic part...
The general process of mold design and drawing
The general process of mold design and drawingOne: Organize and inspect customer...
Types and basic requirements of mold design drawings
Types and basic requirements of mold design drawingsTo shorten the production cy...
Classification of injection molds
Classification of injection moldsDifferent types of molds have different require...
Solutions to the problem of easy breakage at the junction of the mold's appearance color difference and material flow
Solutions to the problem of easy breakage at the junction of the mold's appearan...
Solutions to surface flow patterns, deformation and ejection deformation on both sides of the mold
Solutions to surface flow patterns, deformation and ejection deformation on both...
Solutions for the rubber powder and inner side scratches on the sprue of the mold
Solutions for the rubber powder and inner side scratches on the sprue of the mol...
Solutions to the deformation at the sprue position of the mold, the flash at the round top pin position (excessive glue), and the baking mark at the glue inlet position
Solutions to the deformation at the sprue position of the mold, the flash at the...
Solutions for burrs, sticking to the mold, wire clamping and deformation of the mold
Solutions for burrs, sticking to the mold, wire clamping and deformation of the ...
How can the surface dirt, water line inclusion and warping deformation of the mold be solved
How can the surface dirt, water line inclusion and warping deformation of the mo...
Solutions to the problems of hard rubber indentation, row position demolding and inconsistent product dimensions in molds
Solutions to the problems of hard rubber indentation, row position demolding and...
The decisive methods for the height of the water outlet position beside the mold housing, the damage and deformation of the front mold cavity
The decisive methods for the height of the water outlet position beside the mold...
Solutions for air marks at the water outlet position of the mold and drag damage at the water outlet position of the battery frame
Solutions for air marks at the water outlet position of the mold and drag damage...
How can the top white and surface elevation of the mold be solved
How can the top white and surface elevation of the mold be solvedThe top white o...